Customized flat wire compression Overlapping wave spring washers sizes
Material Finishes:
1.Passivation
Passivation is an optional cleaning operation for stainless steel. It provides a bright finish and increased corrosion resistance. Passivation dissolves iron particles and other substances, which have become imbedded in the surface of stainless steel during production. If not dissolved, these foreign particles could promote rusting, discoloration or even pitting.
2.Vapor Degrease/Ultrasoni
This is the standard cleaning and finish for all stainless steels. The process removes oil and other organic compounds from the material surface by use of a chlorinated solvent. The solvent effectively removes oil and grease from the exposed surfaces of the ring or spring. Ultrasonics are used in forcing the solvent to act between the turns of the ring.
3.Vibratory Deburr/Hand Deburr
Though all circumferential surfaces and edges of Spirolox Rings are smooth, sharp corners are always present on the gap ends due to the cut-off operation. To break the sharp corners, achieving a blended/smooth surface finish, rings may either be vibratory or hand deburred to meet your specifications.
Specification:
| Part No. | Operates in
Bore Diameter | Lears Shaft
Diameter | Load | Work Height | Free Height | Waves | Thinkness | Radial Wall | Spring Rate | Open
mode |
| mm | mm | (N) | mm | mm | mm | mm | N/MM |
| JBT-042 | 42 | - | 205-295 | 1.5 | 2.7 | 4 | 0.53 | 3.63 | - | overlap |
| LB-0165 | 42 | 33.72 | 115.7 | 1.98 | 3.05 | 4 | 0.46 | 3.63 | 99 | overlap |
| LR-0175 | 44.45 | 36.58 | 133.36 | 1.98 | 3.56 | 4 | 0.46 | 3.63 | 84.7 | gap |
| JBT-047 | 47 | - | 225-315 | 1.5 | 3.4 | 4 | 0.59 | 3.23 | - | overlap |
| LB-0185 | 47 | 38.72 | 129 | 1.98 | 3.81 | 4 | 0.46 | 3.63 | 68 | overlap |
| LR-0187 | 47.63 | 39.62 | 142.25 | 1.98 | 3.81 | 4 | 0.46 | 3.63 | 77.7 | gap |
| LR-0200 | 50.8 | 42.67 | 151.14 | 2.36 | 3.56 | 4 | 0.61 | 3.81 | 126.53 | gap |
| LB-0453 | 115 | 101.38 | 315.9 | 3.18 | 6.35 | 5 | 0.76 | 5.92 | 99 | gap |
| LR-0462 | 117.48 | 104.39 | 324.51 | 3.18 | 6.86 | 5 | 0.76 | 5.92 | 88.03 | gap |
| LR-0462-N | 117.48 | 106.43 | 324.51 | 3.18 | 6.86 | 5 | 0.76 | 4.78 | 88.03 | gap |
| JBT-120 | 120 | - | 515-625 | 2 | 5.8 | 6 | 0.76 | 4.78 | - | gap |
| LB-0472 | 120 | 106.38 | 329.3 | 3.18 | 7.11 | 5 | 0.76 | 5.92 | 86 | gap |
| LR-0475 | 120.65 | 107.7 | 333.4 | 3.18 | 7.87 | 5 | 0.76 | 5.92 | 70.88 | gap |
| LR-0475-N | 120.65 | 109.73 | 333.4 | 3.18 | 8.13 | 5 | 0.76 | 4.78 | 67.38 | gap |
| LR-0487 | 123.83 | 111 | 337.84 | 3.18 | 7.37 | 5 | 0.76 | 5.92 | 80.68 | gap |
| LR-0487-N | 123.83 | 112.78 | 337.84 | 3.18 | 8.13 | 5 | 0.76 | 4.78 | 68.25 | gap |
| JBT-125 | 125 | - | 515-625 | 2 | 6.2 | 6 | 0.76 | 4.78 | - | gap |
| LB-0492 | 125 | 111.38 | 342.6 | 3.18 | 7.62 | 5 | 0.76 | 5.92 | 76 | gap |
| LR-0500 | 127 | 114.05 | 346.73 | 3.18 | 7.87 | 5 | 0.76 | 5.92 | 73.85 | gap |
| LR-0500-N | 127 | 116.08 | 346.73 | 3.18 | 8.89 | 5 | 0.76 | 4.78 | 60.73 | gap |
| JBT-130 | 130 | - | 525-635 | 3 | 4.7 | 6 | 0.87 | 6.33 | - | gap |
Factory introduction:
The company has successfully passed ISO9001 and IATF16949 quality management system certification. Our wave springs and spiral retaining rings are mainly used in aerospace, automobile, petroleum, medical equipment, wind energy, construction machinery, consumer electronics and other industrial products .
Product Tags:
|
|
Customized Flat Wire Compression Overlapping Wave Spring Washers Sizes Images
|
